PowerEdge M910
Four-socket blade for large databases and memory-heavy VMs inside an M1000e.
The PowerEdge M910 is an end-of-life model with no vendor support; we keep it running while you plan a replacement. Four-socket blade for large databases and memory-heavy VMs inside an M1000e.
Platform facts
| Vendor | Dell |
|---|---|
| Generation | 11G |
| Form factor | blade (full-height) |
| Sockets | 4 |
| CPU | Intel Xeon 7500 / E7-4800 series (Nehalem-EX / Westmere-EX) |
| DIMM slots | 32 |
| Memory | DDR3 RDIMM, up to 512 GB |
| Storage | 2x 2.5-inch SAS/SATA/SSD |
| RAID | PERC H200, H700 modular |
| Management | iDRAC6 Enterprise |
| Released | 2010 |
| Status | end of life |
Field notes
Uses FlexMem Bridge like the R810, so all 32 DIMMs are usable with two CPUs. Power budget in the chassis matters; a fully loaded M1000e with M910s needs all six PSUs on 3-phase or high-line power. Firmware order is CMC, then iDRAC, then BIOS. Out of support; replace with an R860 or MX760c.
What we do with the PowerEdge M910
- Specification and procurement of new PowerEdge servers, configured to order
- Rack, rail and cable installation, iDRAC setup and firmware baseline
- Memory, NVMe, PERC and NIC upgrades with qualified parts
- Out-of-warranty repair: PSU, fan, backplane, PERC battery and motherboard replacement
- OS and hypervisor installs: Windows Server, VMware, Proxmox, RHEL, Ubuntu
- ProSupport case handling and lifecycle refresh planning
Keep it or replace it?
A PowerEdge M910 can keep doing a single job for years if it has good backups, current firmware and spare parts on the shelf. It should not be the only copy of anything, and it should not be internet-facing on an unsupported OS. We will tell you honestly whether a memory or disk upgrade buys useful time or whether the money belongs in a replacement.
Replacement planning covers the OS and licences, not only the box: a PowerEdge M910 running Windows Server 2012 or an old ESXi needs a migration plan, not a lift-and-shift.
Related models
Related services
Frequently asked questions
Do you work on PowerEdge servers you did not sell?
Yes. Most of our Dell work is on servers a business already owns, in or out of warranty.
Can you update firmware without downtime?
iDRAC and some component firmware update live. BIOS, PERC and NIC firmware need a reboot, which we schedule in a maintenance window.
Can the PowerEdge M910 run a current operating system?
Check the field notes above. As a rule, current models are certified for Windows Server 2022/2025, ESXi 8 and RHEL 9; legacy models usually stop at Windows Server 2019 or ESXi 7 and may need Proxmox or an older Linux to stay useful.
Need a hand with this?
Tell us what you are running and what is slowing you down. You get a straight assessment and a plan, with no obligation. Support desk is staffed 24/7.