PowerEdge FC630
Two-socket compute sled for FX2 clusters, four per 2U.
The PowerEdge FC630 is a legacy model past vendor sales, usually out of warranty but still serviceable. Two-socket compute sled for FX2 clusters, four per 2U.
Platform facts
| Vendor | Dell |
|---|---|
| Generation | 13G |
| Form factor | sled (half-width, FX2) |
| Sockets | 2 |
| CPU | Intel Xeon E5-2600 v3/v4 (Haswell-EP / Broadwell-EP) |
| DIMM slots | 24 |
| Memory | DDR4 RDIMM/LRDIMM, up to 768 GB (1.5 TB with 64 GB LRDIMMs) |
| Storage | 2x 2.5-inch or 8x 1.8-inch SSD, internal dual SD |
| RAID | PERC H330, H730P modular; HBA330 |
| Management | iDRAC8 Enterprise |
| Released | 2014 |
| Status | legacy |
Field notes
Effectively an R630 on a sled. Networking comes from the chassis I/O aggregator, so NIC firmware is a chassis matter. Same PERC battery and SD boot issues. Windows Server 2019 / ESXi 7.0 ceilings. Replace with R660 or MX760c.
Successor: PowerEdge FC640.
What we do with the PowerEdge FC630
- Specification and procurement of new PowerEdge servers, configured to order
- Rack, rail and cable installation, iDRAC setup and firmware baseline
- Memory, NVMe, PERC and NIC upgrades with qualified parts
- Out-of-warranty repair: PSU, fan, backplane, PERC battery and motherboard replacement
- OS and hypervisor installs: Windows Server, VMware, Proxmox, RHEL, Ubuntu
- ProSupport case handling and lifecycle refresh planning
Keep it or replace it?
A PowerEdge FC630 can keep doing a single job for years if it has good backups, current firmware and spare parts on the shelf. It should not be the only copy of anything, and it should not be internet-facing on an unsupported OS. We will tell you honestly whether a memory or disk upgrade buys useful time or whether the money belongs in a replacement.
Replacement planning covers the OS and licences, not only the box: a PowerEdge FC630 running Windows Server 2012 or an old ESXi needs a migration plan, not a lift-and-shift.
Related models
Related services
Frequently asked questions
Do you work on PowerEdge servers you did not sell?
Yes. Most of our Dell work is on servers a business already owns, in or out of warranty.
Can you update firmware without downtime?
iDRAC and some component firmware update live. BIOS, PERC and NIC firmware need a reboot, which we schedule in a maintenance window.
Can the PowerEdge FC630 run a current operating system?
Check the field notes above. As a rule, current models are certified for Windows Server 2022/2025, ESXi 8 and RHEL 9; legacy models usually stop at Windows Server 2019 or ESXi 7 and may need Proxmox or an older Linux to stay useful.
Need a hand with this?
Tell us what you are running and what is slowing you down. You get a straight assessment and a plan, with no obligation. Support desk is staffed 24/7.