PowerConnect 6224 / 6248 (P)
24/48x 1 GbE, Layer 3, stacking modules
The PowerConnect 6224 / 6248 (P) is an end-of-life model with no vendor software support; we support it in place and plan the replacement. It belongs to the Dell legacy switches (PowerConnect, Force10) family.
At a glance
| Vendor | Dell |
|---|---|
| Family | Dell legacy switches (PowerConnect, Force10) |
| Ports and features | 24/48x 1 GbE, Layer 3, stacking modules |
| Status | end of life |
About the family
PowerConnect 2800/3500/5500/6200/7000/8000 series and Force10 S-series switches from before the PowerSwitch rebrand. Many are still in service; firmware and support have ended.
We keep these running when needed but recommend a replacement plan. Spanning tree behavior and unsupported firmware are the usual hazards.
What RackLedge does with the PowerConnect 6224 / 6248 (P)
- Configuration from a documented template: VLANs, trunks, spanning tree, management access, logging
- Installation, uplinks and stacking or HA pairing
- Firmware updates and configuration backups on a schedule
- Troubleshooting and RMA handling
- Migration to a supported replacement
Related models
Frequently asked questions
Is the PowerConnect 6224 / 6248 (P) still supported?
It is an end-of-life model with no vendor software support; we support it in place and plan the replacement. We recommend budgeting a replacement within the next hardware cycle.
Do you support hardware you did not sell?
Yes. We take over existing networks, document them, back up the configurations and fix what is broken.
Can you manage it remotely?
Yes, through a secure management VPN or the vendor's cloud console where one exists. Physical work is done on-site in Texas or by partner hands elsewhere.
Need a hand with this?
Tell us what you are running and what is slowing you down. You get a straight assessment and a plan, with no obligation. Support desk is staffed 24/7.